FAQ

Kitchen remodeling: questions and answers

Answers about kitchen remodeling from HH Remodeling LLC.

How long does a kitchen sink and faucet installation usually take?

Replacing an existing kitchen sink and faucet typically takes two to four hours. The timeframe depends directly on whether you are doing a direct replacement or changing styles. Swapping an identical drop-in sink with compatible supply lines is fast, but transitioning from an overmount to an undermount model requires cutting, modifying, or refinishing countertop edges. Additional tasks such as installing a garbage disposal, running lines for a water filtration system, or updating old shut-off valves under the sink will also add time to the job.

What needs to be completed in the kitchen before cabinets are installed?

Before cabinet installation begins, all mechanical rough-ins must be completely finished and inspected. This includes moving electrical lines for under-cabinet lighting, running dedicated circuits for microwaves and wall ovens, and positioning plumbing supply lines and drain pipes for the sink. Drywall should be hung, taped, and prepped, and the kitchen workspace must be cleared of old cabinetry and appliances. Marking stud locations on the walls ahead of time helps verify where heavy upper cabinets will anchor securely into the wall framing.

Can cabinet painting be included in a kitchen remodel instead of cabinet replacement?

Painting existing kitchen cabinets requires intensive surface preparation and specialized coatings that differ from standard wall painting. Cabinets require thorough degreasing, scuff sanding, high-adhesion bonding primer, and durable enamel coatings to withstand daily hand oils, heat, and impacts. Painting walls involves standard acrylic latex finishes over patched sheetrock. If cabinet doors are structurally sound and the layout works, refinishing them saves substantial money compared to replacing the full cabinet boxes during a kitchen update.

What does kitchen cabinet removal involve?

Kitchen cabinet removal involves carefully unfastening, dismantling, and taking out existing upper and lower cabinetry, trim, and mounting hardware. The process begins with clearing out contents, shutting off relevant plumbing or electrical feeds, and removing doors, drawers, and countertops. Technicians then unscrew the face frames and back panels from the wall studs to avoid tearing drywall. If you plan to donate, sell, or relocate the boxes, crews use gentle pry techniques rather than destructive demolition to preserve structural framing.

How should I prepare my home before kitchen demolition begins?

Before construction starts, clear out every cabinet, pantry shelf, and countertop completely. Pack away non-essential kitchenware, label boxes clearly, and designate a separate living area as a temporary kitchenette equipped with a microwave, coffee maker, and mini-fridge. You should also confirm your layout plans, appliance dimensions, and finish materials—like tile, fixtures, and trim profiles—ahead of demo day. Establishing clear access paths and dust barriers protects adjacent living spaces from drywall dust and debris throughout the tear-out.

How long does a typical kitchen flooring installation take?

Most residential kitchen flooring projects take between two and four days to complete, depending on the material and room size. A simple floating luxury vinyl plank floor can often be laid in one to two days. Tile or marble installation takes longer, typically three to five days, because it involves subfloor prep, laying mortar, cutting pieces around islands, letting thinset cure, and grouting. If the project requires removing old layers of glued linoleum or leveling an uneven subfloor, extra time must be scheduled before new flooring can go down.

Does the drywall behind a kitchen backsplash need repair before new tile is installed?

Yes, your drywall must be clean, flat, and structurally sound before tile can be set. If removing an old backsplash leaves gouges, peeled paper, or crumbling gypsum, the wall must be repaired or replaced with fresh drywall or backer board first. Installing tile over compromised drywall causes uneven tiles, weak adhesive bonding, and eventual loose or cracked grout lines. For homeowners with older or damaged walls, completing proper drywall patching and sanding upfront establishes the smooth, stable substrate needed for level, straight grout lines.

How do finish carpenters handle uneven ceilings when installing crown molding on cabinets?

Drywall ceilings in both historic and newer homes across the Denver metro area are rarely flat, often dipping or crowning across a wall span. To resolve this, a finish carpenter can install a two-piece or three-piece crown assembly using a flat riser board (backer board) attached to the cabinet tops. The riser board is scribed or adjusted to absorb ceiling variations, while the decorative crown molding is installed level along the top. This technique eliminates visible gaps between the trim and ceiling without pushing upper cabinets out of square.

How much time does moving kitchen plumbing and appliances add to a remodel?

Moving major appliances or the primary sink typically adds between one and three weeks to your kitchen remodel schedule. Relocating these fixtures requires opening drywall or subfloors to extend supply lines, drain lines, gas tubing, or 240-volt electrical circuits. The work also requires coordination with licensed trade rough-ins and city inspections before walls can be closed. If your home has a finished basement or is built on a concrete slab, running new drain lines requires additional demolition and repair time compared to an open crawlspace.

Is a professionally mortared tile backsplash better than peel-and-stick tile?

A peel-and-stick backsplash works as a temporary cosmetic fix, but mortared tile is the better choice for permanent durability and home value. Adhesive sticker tiles can loosen and peel when exposed to moisture from sinks and heat from cooktops. Real ceramic, porcelain, or stone tile set in thin-set mortar bonds permanently to the wall and handles heat, steam, and everyday cleaning without lifting. While mortared tile requires a larger upfront investment and professional installation, it offers lasting performance and protects the underlying wall.

How should I prepare my kitchen before countertop installation?

Before crews arrive for templating or installation, clear everything off your current countertops, kitchen island, and surrounding floor paths. Empty the base cabinets beneath the sink and cooktop so technicians can access plumbing connections, mounting hardware, and electrical lines safely. Have your new sink, faucet, cooktop, and soap dispensers on site during the templating appointment so fabricators can measure exact cutout dimensions. Clear a wide path from the entryway to the kitchen to allow safe transport of large, heavy stone slabs.

How long does a kitchen countertop replacement take from start to finish?

Most countertop installations take one to two days on site, but the entire process typically spans one to three weeks. After you select your material, technicians create an exact laser template of your existing cabinetry. Custom fabrication at the stone shop takes roughly one to two weeks depending on the slab. On installation day, crews remove old counters, set the new slabs, join seams, cut holes for fixtures, and mount your sink. Plumbing reconnections are usually scheduled for the following day to allow adhesives and silicone to cure properly.

Should I choose a single-handle or two-handle kitchen faucet?

Single-handle faucets offer convenience, letting you adjust temperature and water flow with one hand, which is ideal when cooking. Two-handle faucets provide precise separate control of hot and cold water and fit traditional decor. The tradeoff is installation complexity: single-handle faucets typically use a single hole (with an optional escutcheon plate), whereas two-handle designs require three holes spaced specifically. Selecting a model that matches your current sink drillings avoids the need for drilling extra holes in stone surfaces.

How do ceramic, natural stone, and glass backsplash tiles compare?

Ceramic and porcelain tiles are durable, stain-resistant, and cost-effective, but they require periodic grout maintenance. Natural stone such as marble, slate, or travertine delivers a high-end, organic look, though it is porous and requires regular sealing to prevent oil and moisture stains. Glass tile reflects light and creates an open feel, yet it requires specialized mortar and expert cutting to prevent chipping. Consider your cooking habits: heavy-use cooktop areas benefit most from low-porosity materials like porcelain or solid slabs.

How do I choose the correct faucet for my kitchen sink configuration?

To select the right faucet, you must match the faucet design to the pre-drilled holes in your sink or countertop. Count the existing holes: single-hole faucets can install directly or use an optional escutcheon plate to conceal three-hole configurations, whereas widespread or bridge faucets require specific spacing. You should also evaluate faucet height and spout reach to make sure water hits the center of the basin without splashing, while confirming the high-arc neck clears any overhead cabinetry, window trim, or shelving above the sink.

How are transitions handled between kitchen flooring and adjacent living areas?

Transitions between the kitchen and adjacent rooms must account for height differences and movement gaps. When moving from thick tile to lower carpet or hardwood, installers use sloped threshold reducers or custom wood transition strips to eliminate tripping hazards and ensure a smooth visual break. For open-concept floor plans popular in modern Colorado homes, many homeowners choose to run continuous luxury vinyl plank or hardwood across both the kitchen and living room to create a unified, expansive aesthetic without any transition strips at all.

What does the kitchen drywall repair process involve?

Kitchen drywall repair involves cutting out damaged sections, installing new drywall backing, taping, applying joint compound in multiple thin coats, sanding smooth, and blending the texture to match the existing wall. Because kitchens have grease, steam, and high-gloss or semi-gloss paints, the area must be thoroughly degreased and primed before the final coat of paint. If the repair sits behind appliances, outlets, or upper cabinets, tradespeople must also secure the edges properly so future cabinet movement or vibration does not crack the patch.

What factors influence the total cost of kitchen trim installation?

The overall cost depends on linear footage, material choice, ceiling height, and whether your walls are plumb. Hardwood moldings like maple or oak cost significantly more than painted MDF or polyurethane options. Labor costs rise when dealing with uneven ceilings, out-of-square walls, or intricate multi-piece crown profiles that demand compound miter cuts and custom scribing. Additional factors include cabinet perimeter length, custom corner blocks, and whether the trim arrives pre-finished or requires on-site priming, caulking, and enamel painting.

What are the tradeoffs of opening a closed kitchen into the living area?

Opening up a kitchen to an adjacent dining or living room creates better sightlines, increases natural light, and allows easier conversation while cooking. The tradeoff is a substantial loss of upper wall cabinet space, which reduces closed pantry and dish storage. Open plans also let cooking noise and odors drift freely into main living zones. To offset lost wall cabinets, homeowners often install large storage islands with deep drawers, build ceiling-height perimeter pantries, or incorporate high-CFM range hoods to manage cooking steam and grease.

How do I clean and maintain kitchen backsplash tile?

Backsplash tile is relatively simple to clean, but harsh cleaners should be avoided. For ceramic and porcelain, warm water mixed with mild dish soap or a neutral pH cleaner wiped down with a microfiber cloth removes daily grease splatters effectively. If your backsplash features natural stone or marble, stay away from acidic or abrasive cleaners such as vinegar, lemon juice, or bleach, as they etch stone surfaces and strip protective sealers. Reapplying stone sealer once every year or two preserves the finish against stubborn cooking oils.

What is the difference between a kitchen remodel and a kitchen addition?

A kitchen addition expands your home's exterior footprint to add physical square footage, while a standard kitchen remodel updates or rearranges space within your existing walls. Choosing between the two depends on your site constraints and storage needs. An addition requires structural foundation work, new framing, roof tie-ins, and exterior finishing alongside interior trades. Remodels avoid major exterior construction, making them faster, but they cannot solve fundamental spatial shortages if adjacent interior rooms cannot be absorbed.

Can standard wall paint be used on kitchen cabinets?

Standard wall paint should not be used on kitchen cabinets because it lacks the hardness and chemical resistance needed for daily contact. Cabinets face frequent hand oils, spills, and impact, which quickly scuffs or softens standard latex wall paint. Cabinet projects demand specialized urethane-modified alkyds or hard-wearing cabinet enamels that cure to a smooth, durable finish. While standard wall paint dries faster and costs less up front, using it on cabinetry leads to chipping, peeling around handles, and sticky doors within months.

Should I install countertops or the tile backsplash first?

Yes, you should always replace or install countertops before putting in your kitchen backsplash. Countertops serve as the baseline and foundation for the bottom row of tiles. Installing countertops first ensures that tiles sit flush against a level surface without awkward gaps. Additionally, installing heavy stone slabs after tiling risks chipping or cracking new tiles during delivery and placement. Once countertops are secure, installers can place the tile directly above the deck and seal the interface with flexible, color-matched caulk.

What factors determine the cost of kitchen door frame repair?

Kitchen door frame repair costs depend on the extent of the damage, the frame material, and whether the door itself needs rehanging. Minor adjustments—such as securing stripped hinge screw holes, adjusting strike plates, or patching cosmetic scratches—fall at the lower end of the spectrum. Splicing rotted wood sections, rebuilding split strike jambs from forced entry, or custom-milling trim to match older kitchen cabinetry increases labor time and material expense. Replacing the entire pre-hung jamb unit also costs more than spot repairs.

Should I paint, reface, or completely replace my kitchen cabinets?

The decision depends on your cabinet boxes' physical condition, internal construction, and desired kitchen layout. Painting or refacing existing cabinets makes sense if the cabinet frames are solid hardwood or sturdy plywood and you are happy with the current cabinet footprint. This path saves significant budget and shortens project schedules. However, you should replace cabinets if the boxes are sagging, water-damaged, made of failing particle board, or if you need to reconfigure storage with deep drawers, pull-out pantries, or taller upper cabinets.

Can molding be added to existing kitchen cabinets?

You can install molding on existing cabinets to give your kitchen an updated, high-end look without a full remodel. The primary challenge is matching the wood species, paint color, or stain sheen of your existing cabinetry. Wood naturally darkens or fades with age and sunlight exposure, so stock factory colors rarely match aged cabinets perfectly. An installer will measure your cabinet frame reveals, check ceiling clearances for swing space on cabinet doors, and often take a door sample to custom-match paint or stain before installation.

What factors determine the cost of installing a tile backsplash?

Backsplash installation costs depend on the square footage, the type of tile chosen, wall condition, and the complexity of cuts. Basic ceramic subway tile on a clean, flat wall sits at the lower end of the labor scale. Intricate patterns like herringbone, small mosaic sheets, or thick natural stone require substantially more cutting time and precision around outlets, under-cabinet lighting, and corners. If the existing wall has significant drywall damage or old adhesive that must be scraped and repaired before tiling, labor time increases accordingly.

How should I prepare my kitchen before the flooring crew arrives?

Before installation begins, clear the kitchen of all freestanding items, pantry goods, and small appliances. Empty lower cabinets if baseboards or toe kicks are being altered, and arrange for major appliances—like the refrigerator, range, and dishwasher—to be disconnected and moved safely. Clear a pathway from the exterior entryway to the kitchen so the crew can transport materials and tools efficiently. It is also helpful to confirm where transition strips will meet neighboring rooms like dining spaces or hallways so door thresholds line up smoothly.

Can kitchen cabinets be removed without damaging them so they can be reused?

Yes, kitchen cabinets can be removed intact without destroying them, but it requires a careful, methodical approach. Instead of using demolition pry bars, crews back out individual screws from face frames and wall studs, score caulk lines, and detach adjoining boxes cleanly. Choosing salvage over quick demo takes more labor time and care, but it leaves the boxes usable for resale, donation, or repurposing in utility spaces like garages, laundry rooms, or basements. It also significantly reduces tear-out damage to the underlying drywall.

What happens during the professional cabinet installation process?

Cabinet installation requires multiple stages to ensure structural integrity and a clean finish. First, the old cabinetry is carefully removed and walls are inspected for plumbing, electrical, or drywall repairs. Next, the installer finds the high point of the floor and marks level reference lines along wall studs. Upper cabinets are mounted first, anchored into structural framing. Base cabinets are then set, leveled with shims, and fastened together. Finally, doors are aligned, decorative molding is installed, and hardware is attached.

Related guides